Single Piece Masonry Hanger 47 x 125mm
Single Piece Masonry Hanger 47 x 125mm
- Product Code: U1446
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model: FHM47/125
- Weight: 0.38kg
Single Piece Masonry Hanger 47 x 125mm
47mm x 125mm Single Piece Joist Hanger is designed to support timber joists built into brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber-to-timber applications by securely fixing the masonry flange to timber or steel beams using appropriate fixings. The straight top flange and a lock plate allow the hanger to be transformed into a straddle or hook over configuration, without the need for special equipment. The hanger has a long-term safe working load of 5.4 kN.
FIXING INSTRUCTIONS for 47x125mm Single Piece Masonry Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to cure before any load is applied.
- Joist should be square-cut and fit snugly against the back of the hanger - maximum allowable gap is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanized square twist nails or equivalent. For stainless steel hangers, use 30 x 3.75mm annular ring shank nails.
- Utilize HD straps for lateral restraint.
- The masonry flange should always be securely fixed or adequately embedded and must never be placed in dry slots.
- Use appropriate fixings.
- Always ensure that compatible corrosion-resistant fixings are used, i.e., do not mix galvanized fixings with stainless steel products.
- Use mortar of the correct strength as per the British Standard.
SPECIFICATION
- Galvanized steel to EN 10346 DX51D Z600.
- Tested by CERAM Research Ltd Notification Body No.1289.
- Manufactured to EN 845-1:2013.
Masonry-Hangers_data_sheet.pdf
Brand: Teco
Model: FHMR115
Delivery Time: 3 - 5 days
115mm Single Piece Masonry Hanger Lock Plate serves as an additional component for use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate can be conveniently converted into a hook-over joist hanger without the need for special tools or rivets. Simply insert the..
Brand: Teco
Model: MINI - 44x97
Delivery Time: 1 - 2 days
44x97mm Woody Mini Joist Hanger is produced in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275 using 1mm thick pre-galvanised mild steel. Also available in stainless steel. The hanger includes a base tag that can significantly contribute to faster and more accurate install..
Brand: Teco
Model: MINI - 38x100
Delivery Time: 1 - 2 days
38x100mm Woody Mini Joist Hanger is produced in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275 using 1mm thick pre-galvanised mild steel. Also available in stainless steel. The hanger includes a base tag that can significantly contribute to faster and more accurate instal..
Brand: Teco
Model: WM132x200
Delivery Time: 3 - 5 days
132mm x 200mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber..
Brand: Teco
Model: MINI - 47x95
Delivery Time: 1 - 2 days
47x95mm Woody Mini Joist Hanger is produced in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275 using 1mm thick pre-galvanised mild steel. Also available in stainless steel. The hanger includes a base tag that can significantly contribute to faster and more accurate install..
Brand: Teco
Model: MMINI - 50x65
Delivery Time: 1 - 2 days
50x65mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced using pre-galvanised milk steel which is 1mm thick with a tag on the base of the hanger to help avoid rotation and aid fast, acc..