Single Piece Masonry Hanger 47 x 150mm
Single Piece Masonry Hanger 47 x 150mm
- Product Code: U1447
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: FHM47/150
- Weight: 0.40kg
Single Piece Masonry Hanger 47 x 150mm
47mm x 150mm Single Piece Joist Hanger is designed to support timber joists built into brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber-to-timber applications by securely fixing the masonry flange to timber or steel beams using appropriate fixings. The straight top flange and a lock plate allow the hanger to be transformed into a straddle or hook over configuration, without the need for special equipment. The hanger has a long-term safe working load of 5.4 kN.
FIXING INSTRUCTIONS for 47x150mm Single Piece Masonry Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to cure before any load is applied.
- Joist should be square-cut and fit snugly against the back of the hanger - maximum allowable gap is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanized square twist nails or equivalent. For stainless steel hangers, use 30 x 3.75mm annular ring shank nails.
- Utilize HD straps for lateral restraint.
- The masonry flange should always be securely fixed or adequately embedded and must never be placed in dry slots.
- Use appropriate fixings.
- Always ensure that compatible corrosion-resistant fixings are used, i.e., do not mix galvanized fixings with stainless steel products.
- Use mortar of the correct strength as per the British Standard.
SPECIFICATION
- Galvanized steel to EN 10346 DX51D Z600.
- Tested by CERAM Research Ltd Notification Body No.1289.
- Manufactured to EN 845-1:2013.
Masonry-Hangers_data_sheet.pdf
Brand: Teco
Model and Size: WR75X225R100
Delivery Time: 3 - 5 days
75mm x 225mm Welded Return Joist Hanger R100mm, designed for a range of applications and installation scenarios, similar to the standard Masonry Joist Hanger. The return feature provides enhanced lateral support by wrapping around the rear of masonry or timber elements. Standard configuration includ..
Brand: Teco
Model and Size: LL - 132x450
Delivery Time: 1 - 2 days
Woody Long Leg Joist Hanger 132 x 450mm, crafted from sturdy 1.5mm thick pre-galvanized mild steel in accordance with the exacting standards of EN 10346 DX51D+Z275. Boasting a generous 50mm joist bearing, this timber-to-timber joist hanger is designed for applications such as Loft Conversions, where..
Brand: Teco
Model and Size: WM63x200
Delivery Time: 3 - 5 days
63x200mm Masonry Joist Hanger with Welded Construction
Elevate the support for your timber joists integrated into brick or block walls with our remarkable 63mm x 200mm Masonry Joist Hanger. Engineered to withstand a minimum crushing strength of 3.5N/mm, this versatile hanger is also suitable ..
Brand: Teco
Model and Size: WM75x225
Delivery Time: 3 - 5 days
75x225mm Masonry Joist Hanger with Welded Construction
Elevate the support for your timber joists integrated into brick or block walls with our remarkable 75mm x 225mm Masonry Joist Hanger. Engineered to withstand a minimum crushing strength of 3.5N/mm, this versatile hanger is also suitable ..
Brand: Teco
Model and Size: FHM50/225
Delivery Time: 1 - 2 days
50mm x 225mm Single Piece Joist Hanger is designed to provide robust support for timber joists integrated into brick or block walls with a minimum crushing strength of 3.5N/mm. It is equally suitable for a range of timber-to-timber applications, ensuring the masonry flange is securely affixed to the..
Brand: Teco
Model and Size: MMINI - 38x72
Delivery Time: 1 - 2 days
38x72mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced using pre-galvanised milk steel which is 1mm thick with a tag on the base of the hanger to help avoid rotation and aid fast, acc..