Owatrol Compo Care Protection of composite boards
-500x500.jpg "Owatrol Compo Care Protection of composite boards")
-80x80.jpg "Owatrol Compo Care Protection of composite boards")
Owatrol Compo Care Protection of composite boards
- Product Code: U3154
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: Compo Care
Owatrol Compo Care Protection of composite boards
Owatrol Compo Care – Protection and Colour Restoration for Composite Boards is a water-based protective treatment designed to refresh, enhance and maintain composite decking and cladding. It restores faded colour, protects against moisture, and prevents deep penetration of oily stains, keeping contaminants on the surface for easier cleaning. Suitable for all types of composite boards, COMPO-CARE is easy to apply, quick drying, and ideal for both smooth and grooved finishes.
Available in two colours: grey and brown.
Properties
- For exterior composite surfaces
- Revitalises and refreshes faded composite boards
- Improves overall visual appearance
- Protects against moisture absorption
- Prevents deep penetration of oily dirt
- Stains remain superficial for easier removal
- Suitable for a wide range of composite products
- Ideal for vertical and horizontal elements such as terraces, façades, porches, garden architecture and furniture
- Works effectively on smooth and grooved boards
- Fast-drying formula
Surface Preparation
- Clean surfaces thoroughly; ensure they are dry and free from oil, grease, mould and fungal growth
- For mould/mildew: wash with a 1:1 mixture of water and household bleach, scrub well, leave 10–15 minutes, rinse thoroughly and allow to dry to below 18% moisture
- Do not dilute – product is ready to use
- Apply in even sections for uniform results
- Protect adjacent areas and water nearby vegetation generously
- Apply on vertical surfaces from bottom to top
- Avoid allowing the product to dry out during application
- Choose stable, dry weather – avoid rain, fog and full sun
How to Apply
- Apply an even coat along the full length of each section
- Avoid overlapping to prevent uneven finish
Drying Time
- Touch dry: approx. 1 hour
- Fully dry: 12–24 hours, depending on temperature and humidity
- High-traffic areas (e.g. terraces, piers, walkways) should not be used for 24 hours
Coverage
- Approx. 15 m²/l depending on surface type and condition
Application Conditions & Tools
- Apply between +5°C and +35°C
- Do not apply on hot or sun-heated surfaces
- Use a synthetic brush or roller
- Clean tools with soapy water
Brand: Various
Model: 24 x 2440 x 1220mm
Delivery Time: 1 - 2 days
Spruce Plywood is an ideal product for both interior and exterior construction work where strength and durability is required. Spruce plywood is manufactured from long-grained, homogenous Nordic conifer with straight fibres. Spruce Plywood panels are lightweight and easy to work with making them eas..
Brand: Various
Model: KDST_47mm x 200mm x 3.6m
Delivery Time: 1 - 2 days
3.6m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Brand: Various
Model: ST_47mm x 100mm x 3.6m
Delivery Time: 1 - 2 days
Kiln Dried Regularised Sawn Treated Timber C16 which has been regularised by planing all round with eased corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesHigh Pressure treated with Tanalith 'E' (or similar)Kiln dried..
Brand: Various
Model: ST_25mm x 38mm x 3.6m
Delivery Time: 1 - 2 days
Sawn Treated Timber Softwood Carcassing is high quality treated sawn timber for general constructionPropertiesHigh Pressure treated with Tanalith 'E' (or similar)All cut ends must be re-sealed with a proprietary treatmentAll of our softwoods are responsibly sourcedAdditional lengths may be available..
Brand: Various
Model: 75mm x 50m
Delivery Time: 1 - 2 days
PropertiesAdheres without primer to many different substrates,
Resistant to UV & weathering,
Seals against gases & water vapour diffusion,
Simple, effective & easy to applySelf AdhesiveHigh performance sealantTear resistantUsesInternal and external sealing Repair of joints and overlap..
£4.99
£5.99 inc VAT
Brand: Various
Model: ST_47mm x 50mm x 3.0m
Delivery Time: 1 - 2 days
47mm x 50mm x 3.0m Sawn Treated Timber Regularised has been regularised by planing all round with eased corners for comfortable handling. The regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.Properties:Long lifespan and high strengthKiln dried to help improve stabi..