50mm x 100mm Hardwood Planed Timber Red Grandis
50mm x 100mm Hardwood Planed Timber Red Grandis
- Product Code: U1694
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: 50mm x 100mm
50mm x 100mm Hardwood Planed Timber Red Grandis
Hardwood Planed Timber is a medium to fine textured, pink hardwood with good machining properties and moderate durability. Ideally suited for the manufacture of Joinery.
Properties
- Light in weight with straight grain, has good strength properties. Can be strength graded for known structural performance (subject to branch availability)
- Plantation grown. Defects are few due to the controlled nature of the trees growth
- A good range of lengths are available. Bespoke cross-cutting service available (subject to branch availability)
- Due to the machining process, this products finished dimensions will be smaller than the nominal sizes stated. Typically, 5 to 6mm less on the thickness and 5 to 8mm on width (dependent on original section)
Brand: Various
Model: ST_47mm x 75mm x 4.8m
Delivery Time: 1 - 2 days
Kiln Dried Regularised Sawn Treated Timber C16 which has been regularised by planing all round with eased corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesHigh Pressure treated with Tanalith 'E' (or similar)Kiln dried..
Brand: Various
Model: 47mm x 150mm
Delivery Time: 1 - 2 days
Sawn Treated Carcassing Timber is high pressure treated with Tanalith ‘E’ (or similar) to enhance resistance to water and damp. Each piece is kiln dried to help improve stability, strength, durability and straightness, making it suitable for use in many construction projects such as stud partitions,..
Brand: Various
Model: 50mm x 100mm x 4.8m
Delivery Time: 1 - 2 days
CLS Profile Kiln Dried Studwork Timber, planed and finished with eased edged to precise tolerances for accurate studwork and framingManufactured from high quality imported Whitewood (Spruce)Regularised by planing all round with 'eased' (rounded) corners for comfortable handlingIdeal for interior fra..
Brand: Various
Model: 23mm x 138mm x 3.6m Driftwood
Delivery Time: 1 - 2 days
Composite Deck Board, this second generation deck board is both UV and stain resistant and is also capped for increased stability.PropertiesSecond generationLow maintenanceHard wearingStain resistantUV resistantDriftwood..
Brand: Various
Model: 2440mm x 1220mm x 18mm
Delivery Time: 1 - 2 days
Marine Plywood is a high quality panel, which performs well under conditions where moisture is a concernPropertiesUsed for general joineryCan be painted and stainedQ Mark VerifiedHigh quality core veneerFace veneer is 1mm thick after sandingMade in accordance with BS1088Not recommended for building ..
Brand: Various
Model: Sand and Stone ballast Trade Pack
Delivery Time: 1 - 2 days
Sand and Stone Ballast Trade Pack is a mixture of sand and stone ballast can be mixed with cement for concreting applications but is also suitable for other building projects such as to provide an even sub-base for driveways, shed bases and more.Supplied in plastic packaging and suitable for outside..