50mm x 100mm Hardwood Planed Timber Red Grandis
50mm x 100mm Hardwood Planed Timber Red Grandis
- Product Code: U1694
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: 50mm x 100mm
50mm x 100mm Hardwood Planed Timber Red Grandis
Hardwood Planed Timber is a medium to fine textured, pink hardwood with good machining properties and moderate durability. Ideally suited for the manufacture of Joinery.
Properties
- Light in weight with straight grain, has good strength properties. Can be strength graded for known structural performance (subject to branch availability)
- Plantation grown. Defects are few due to the controlled nature of the trees growth
- A good range of lengths are available. Bespoke cross-cutting service available (subject to branch availability)
- Due to the machining process, this products finished dimensions will be smaller than the nominal sizes stated. Typically, 5 to 6mm less on the thickness and 5 to 8mm on width (dependent on original section)
Brand: Various
Model: KDST_47mm x 225mm x 4.8m
Delivery Time: 1 - 2 days
4.8m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Brand: Various
Model: 25mm x 150mm
Delivery Time: 1 - 2 days
Hardwood Planed Timber All Round Red Grandis is a medium to fine textured, pink hardwood with good machining properties and moderate durability. Ideally suited for the manufacture of JoineryPropertiesLightweight with straight grain, and good strengthPlantation grown for fewer defectsBespoke cross-cu..
Brand: Various
Model: 22mm x 150mm
Delivery Time: 1 - 2 days
Whitewood Tongue and Grooved Contract Flooring for 'sub floor' application - to accept a finish covering.PropertiesHigh Quality Scandinavian Whitewood (spruce)Responsibly Sourced Softwoods Further Shrinkage May Occur After LayingFinished Dimensions Will Be Smaller Than The Nominal Sizes Stated...
Brand: Various
Model: 3.5x50mm - coarse point
Delivery Time: 1 - 2 days
Properties
Fixing plasterboard to timber and timber studs
Sharp point penetrates effectively
Bugle head countersinks without tearing the paper layer
Coarse threads provide strong holding power..
£20.93
£25.12 inc VAT
Brand: Various
Model: ST_47mm x 100mm x 3.6m
Delivery Time: 1 - 2 days
Kiln Dried Regularised Sawn Treated Timber C16 which has been regularised by planing all round with eased corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesHigh Pressure treated with Tanalith 'E' (or similar)Kiln dried..
Brand: Various
Model: 3.5x55mm
Delivery Time: 1 - 2 days
PropertiesUsed for fixing plasterboard to metal or timber framingSharp point reduces the tearing of the plasterboardBugle head recessed drywall screws..