Targa Blue Mask | UV Resistant Masking Film | 55cm x 20m

Targa Blue Mask is a high quality fabric masking sheet made of polyester and cotton coated with a special adhesive with high adhesive power even at low temperatures. It has excellent adhesive properties with high stickiness even at low temperatures. Good adhesive strength on smooth and rough surfaces. Other outstanding properties are the good unrolling behaviour and the strong, low-stretch carrier.

CHARACTERISTICS

• Dimensions: 55 cm x 20 m
• Carrier material: coated fabric
• Adhesive: UV-stabilised natural rubber
• Adhesive strength on steel: 8.8 N/25mm
• Tear resistance: 118 N/25mm
• Elongation at break: 11%
• Temperature resistance up to +85°C (180min.)
• UV resistance: indoors up to max. 4 weeks / outdoors up to max. 100% 2 weeks
• HDPE film transparent
• Treatment statically charged
• Protect from direct sunlight and other heat sources
• If the storage conditions are observed, the tape can be stored for 12 months

How to use

• Ensure that the surface you’re masking is clean, dry, and free from dust or debris. This will help the adhesive bond properly.
• Unroll the Targa Blue Mask to the desired length. Use scissors or a utility knife to cut the masking material to the appropriate size for your project.
• Align the edge of the Targa Blue Mask with the area you want to protect. Press it down gently to ensure it adheres to the surface.
• Use a flat tool or your hand to smooth out any air bubbles or wrinkles, ensuring that the mask is in full contact with the surface.
• For optimal results, run your finger or a tool along the edges of the mask to create a tight seal. This will help prevent paint from seeping underneath.
• Once the Targa Blue Mask is securely in place, you can begin painting. Be sure to follow the manufacturer's instructions for the paint you are using.
• After the paint has dried, carefully peel away the Targa Blue Mask at a 45-degree angle. This will help maintain clean lines and prevent any paint from chipping.
• Once removed, check the edges for any imperfections. If necessary, touch up any areas for a flawless finish.