Welded Straddle Hanger 75 x 250mm, 100ST
Welded Straddle Hanger 75 x 250mm, 100ST
- Product Code: U1480
- Delivery Time: 3 - 5 days
- Brand: Teco
- Model: WS75x250S100
- Weight: 2.80kg
Welded Straddle Hanger 75 x 250mm, 100ST
75mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger consists of two hangers joined together by a plate on the masonry flange. This design enables precise alignment of two joists positioned directly opposite each other on either side of a wall or beam. Crafted from 2.4mm thick Galvanized steel EN 10346 DX51D Z275, the hanger ensures a long-term safe working load of 3.5 kN.
INSTALLATION of 75x250mm Welded Straddle Hanger 100ST
- The back plate of the hanger should rest flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to cure before any load is applied.
- Joist should be square-cut and sit snugly against the back of the hanger - maximum gap allowed is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanized square twist nails or equivalent.
- Use heavy-duty straps for lateral restraint.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Ensure appropriate fixings are used.
- Always use compatible corrosion-resistant fixings; avoid mixing galvanized fixings with stainless steel products.
- Use mortar of correct strength as per British Standard.
Masonry-Straddle-Hangers_data_sheet.pdf
Brand: Teco
Model: MFM - 76x82
Delivery Time: 1 - 2 days
76mm x 82mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275 using 1.2mm thick pre-galvanised mild steel. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x na..
Brand: Teco
Model: FHMR47X175R140
Delivery Time: 1 - 2 days
47 x 175mm Masonry Return Hanger R140mm is designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. There is a 25mm drop on the return flange as standard but many special..
Brand: Teco
Model: MFT63/504BA - 63x220
Delivery Time: 1 - 2 days
63mm x 220mm Multifunctional Joist Hanger serves as a Face Fix Joist Hanger, constructed from 2mm thick pre-galvanized mild steel in accordance with the specifications outlined in BS EN 10327:2004 DX51D+Z275. This hanger is meticulously designed to facilitate timber-to-masonry and timber-to-timber f..
Brand: Teco
Model: WM132x150
Delivery Time: 3 - 5 days
132mm x 150mm Welded Masonry Joist Holder is designed to provide sturdy support for 150mm high timber joists. The joist holder's actual height is 140mm, and the flange is integrated into brick or block walls. It has a minimum crushing strength of 3.5N/mm. The Welded Masonry Joist Holder is also suit..
Brand: Teco
Model: MFT38/404BA 38x183
Delivery Time: 1 - 2 days
38mm x 183mm Multifunctional Joist Hanger serves as a Face Fix Joist Hanger, constructed from 2mm thick pre-galvanized mild steel in accordance with the specifications outlined in BS EN 10327:2004 DX51D+Z275. This hanger is meticulously designed to facilitate timber-to-masonry and timber-to-timber f..
Brand: Teco
Model: LL - 38x600
Delivery Time: 1 - 2 days
Woody Long Leg Joist Hanger 38 x 600mm, crafted from sturdy 1.5mm thick pre-galvanized mild steel in accordance with the exacting standards of EN 10346 DX51D+Z275. Boasting a generous 50mm joist bearing, this timber-to-timber joist hanger is designed for applications such as Loft Conversions, where ..