14.5mm x 119mm Redwood Tongue and Grooved V Jointed Matchboard Standard
14.5mm x 119mm Redwood Tongue and Grooved V Jointed Matchboard Standard
- Product Code: U1702
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: 14.5mm x 119mm
14.5mm x 119mm Redwood Tongue and Grooved V Jointed Matchboard Standard
Redwood Tongue and Grooved V Jointed Matchboard Standard is a high quality smooth Tongue and grove cladding board with a V joint which gives an attractive pleasing finish. It can be stained, painted or varnished.
Properties
- Responsibly Sourced Redwoods
- Many Other Patterns And Sizes Available To Order
- Also Available Low Pressure Preservative Treated
- Also Available Primed
- Also Available High Pressure Treated With Tanalith 'e' (or Similar), Providing A 15 Year Service Life When Used Above Dpc
- Due To The Machining Process, This Products Finished Dimensions Will Be Smaller Than The Nominal Sizes Stated. Typically, 5 To 6mm Less On The Thickness And 5 To 8mm On Width (dependent On Original Section)
- Range Of Lengths Normally Available: 1.8m And Longer
- A Good Range Of Lengths Are Available. Bespoke Cross-cutting Service Available
- 550.08 Kg Per Mł
Brand: Various
Model: 22mm x 150mm
Delivery Time: 1 - 2 days
Whitewood Tongue and Grooved Contract Flooring for 'sub floor' application - to accept a finish covering.PropertiesHigh Quality Scandinavian Whitewood (spruce)Responsibly Sourced Softwoods Further Shrinkage May Occur After LayingFinished Dimensions Will Be Smaller Than The Nominal Sizes Stated...
Brand: Various
Model: 25mm x 50mm
Delivery Time: 1 - 2 days
Manufactured from high quality Scandinavian unsorted grade redwood (pine). Sizes stated are nominal, finished sizes will be approx 5-6mm smaller.Responsibly Sourced SoftwoodsMany Other Patterns And Sizes Available To OrderAlso Available In Tp 'standard' Quality. Scandinavian 5ths Quality Redwood (pi..
Brand: Various
Model: 14.5 x 94mm x 4.4m
Delivery Time: 1 - 2 days
MDF Painted Truprofile Pencil/Chamfered Round Skirting is a MDF Moulding with a superior prime coating needing minimal finishing, saving both time and moneyPropertiesManufactured In The UKFree From Defects Such As Shakes, Knots And ResinsManufactured from Moisture Resistant MDFEasy To Handle Lengths..
Brand: Various
Model: STR_C16/C24
Delivery Time: 1 - 2 days
75mm x 100mm x 3.6m Sawn Treated Timber Regularised C16/C24 is planed on all edges with 'eased' (rounded) corners for easier handling. This timber finishes 2mm below nominal thickness and 5mm below nominal width, ensuring consistent dimensions.
Properties
High-pressure treated with Tanalith ‘E..
Brand: Various
Model: KDST_47mm x 200mm x 3.0m
Delivery Time: 1 - 2 days
3.0m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Brand: Various
Model: 38mm x 225mm x 3.9m
Delivery Time: 1 - 2 days
End Banded Timber Scaffold Boards, our scaffold boards are graded in accordance with the industry standard BS2482. As well as scaffolding they have a wide variety of other uses.Graded in accordance with BS2482Responsibly sourced softwoods End banded to reduce splittingProduced from Imported, Sl..