Menu
Menu
Your Cart
Ceresit Ewi Systems
4eco
Quality Metal Roofing
Torch-on Roofing Felt

Owatrol Compo Clean cleaning agent for composites

Owatrol Compo Clean cleaning agent for composites
Owatrol Compo Clean cleaning agent for composites
  • Product Code: U3155
  • Delivery Time: 1 - 2 days
  • Brand: Various
  • Model: Compo Clean
Loading...

Available Options

Owatrol Compo Clean cleaning agent for composites

Owatrol Compo Clean – Cleaning Agent for Composite Surfaces is a ready-to-use, water-based cleaner designed to restore the natural appearance of composite decking and cladding. Free from solvents and paraffins, it is environmentally safe and does not react with materials such as glass, plastic or stone. Its gel consistency prevents dripping, making it especially effective on vertical surfaces. Compo Clean removes greasy stains, moss, and both fresh and ingrained dirt on smooth or grooved composite boards.

Properties

  • For outdoor use on composite surfaces
  • Ready-to-use gel formula
  • Environmentally friendly and solvent-free
  • Effective on fresh and deep-seated contamination
  • Suitable for vertical and horizontal applications
  • Ideal for terraces, façades, garden structures and walkways
  • Suitable for both smooth and grooved composite boards
  • Light yellow-orange appearance with a mild odour

Before Use

  • Ensure surfaces are dry and free from sand and dust
  • Shake well before opening
  • Protect adjacent areas and vegetation
  • Water nearby plants thoroughly
  • Work continuously within each defined section for uniform results
  • If mould or fungus is present, scrub with a 1:1 water and household bleach solution, leave 10–15 minutes, rinse and allow to dry (max. 18% moisture)
  • Do not apply to hot surfaces
  • Apply on vertical areas from bottom to top

How to Use

  • Apply a thick, even layer of COMPO-CLEAN
  • Leave for at least 5 minutes (longer for stubborn dirt)
  • Scrub using a stiff synthetic brush
  • Rinse thoroughly with plenty of water (pressure up to 50 bar)
  • Ensure treated areas remain dry with good weather for at least 2 days
  • Apply any additional finishing products only after 2–3 days

Coverage

  • Approx. 5–10 m²/l depending on the surface type and condition

Application Conditions & Tools

  • Apply between +5°C and +35°C
  • Do not apply in full sun or on hot surfaces
  • Use a synthetic roller or brush, and a stiff nylon brush for scrubbing
  • Rinse using a garden hose or pressure washer
  • Clean tools with water
Brand: Various Model: KDST_47mm x 200mm x 3.0m
Delivery Time: 1 - 2 days
3.0m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Compare this Product
Brand: Various Model: 15mm x 120mm x 3.6m
Delivery Time: 1 - 2 days
Composite Fascia Board is a fascia strip used to give a neat edge finishing to the deckPropertiesLow maintenanceHard wearingStain resistantUV resistant..
Compare this Product
Brand: Various Model: 25kg
Delivery Time: 1 - 2 days
Limelite Renovating Plaster is a Pre-blended and dry-bagged lightweight, cementitious plaster which has been developed to control dampness passing through traditionally constructed plaster. It can also be applied shortly after insertion of a new damp-proof course or system.Lightweight cementitious p..
Compare this Product
Brand: Various Model: 100mm x 750mm
Delivery Time: 1 - 2 days
Bolt Grip Post Support Spike, used to prevent the base of wooden posts being subject to frost and rot from contact with the ground. 100mm x 750mmManufactured from heavy steel and finished in red oxide coating which can be painted to match fence panels and postsTwin bolt system allows easy installati..
Compare this Product
Brand: Various Model: 9 x 2440 x 1220mm
Delivery Time: 1 - 2 days
Spruce Plywood is an ideal product for both interior and exterior construction work where strength and durability is required. Spruce plywood is manufactured from long-grained, homogenous Nordic conifer with straight fibres. Spruce Plywood panels are lightweight and easy to work with making them eas..
Compare this Product
Brand: Various Model: 47mm x 75mm
Delivery Time: 1 - 2 days
Sawn Treated Carcassing Timber is high pressure treated with Tanalith ‘E’ (or similar) to enhance resistance to water and damp. Each piece is kiln dried to help improve stability, strength, durability and straightness, making it suitable for use in many construction projects such as stud partitions,..
Compare this Product