Owatrol Compo Clean cleaning agent for composites
Owatrol Compo Clean cleaning agent for composites
- Product Code: U3155
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: Compo Clean
Loading...
Available Options
Owatrol Compo Clean cleaning agent for composites
Owatrol Compo Clean – Cleaning Agent for Composite Surfaces is a ready-to-use, water-based cleaner designed to restore the natural appearance of composite decking and cladding. Free from solvents and paraffins, it is environmentally safe and does not react with materials such as glass, plastic or stone. Its gel consistency prevents dripping, making it especially effective on vertical surfaces. Compo Clean removes greasy stains, moss, and both fresh and ingrained dirt on smooth or grooved composite boards.
Properties
- For outdoor use on composite surfaces
- Ready-to-use gel formula
- Environmentally friendly and solvent-free
- Effective on fresh and deep-seated contamination
- Suitable for vertical and horizontal applications
- Ideal for terraces, façades, garden structures and walkways
- Suitable for both smooth and grooved composite boards
- Light yellow-orange appearance with a mild odour
Before Use
- Ensure surfaces are dry and free from sand and dust
- Shake well before opening
- Protect adjacent areas and vegetation
- Water nearby plants thoroughly
- Work continuously within each defined section for uniform results
- If mould or fungus is present, scrub with a 1:1 water and household bleach solution, leave 10–15 minutes, rinse and allow to dry (max. 18% moisture)
- Do not apply to hot surfaces
- Apply on vertical areas from bottom to top
How to Use
- Apply a thick, even layer of COMPO-CLEAN
- Leave for at least 5 minutes (longer for stubborn dirt)
- Scrub using a stiff synthetic brush
- Rinse thoroughly with plenty of water (pressure up to 50 bar)
- Ensure treated areas remain dry with good weather for at least 2 days
- Apply any additional finishing products only after 2–3 days
Coverage
- Approx. 5–10 m²/l depending on the surface type and condition
Application Conditions & Tools
- Apply between +5°C and +35°C
- Do not apply in full sun or on hot surfaces
- Use a synthetic roller or brush, and a stiff nylon brush for scrubbing
- Rinse using a garden hose or pressure washer
- Clean tools with water
Brand: Various
Model: 19mm x 38mm
Delivery Time: 1 - 2 days
Treated Sawn Tile Batten is a high quality, responsibly sourced, treated sawn timber suitable for general construction use.Each piece is high pressure treated with Tanalith ‘E’ (or similar) to preserve and protect the timber from combat rot, decay and insect attack. All cut ends are re-sealed with a..
Brand: Various
Model: 3.5x75mm - coarse point
Delivery Time: 1 - 2 days
PropertiesFixing plasterboard to timber and timber studs
Sharp point penetrates effectively
Bugle head countersinks without tearing the paper layer
Coarse threads provide strong holding power..
£39.60
£47.52 inc VAT
Brand: Various
Model: 3.5x45mm - coarse point
Delivery Time: 1 - 2 days
Properties
Fixing plasterboard to timber and timber studs
Sharp point penetrates effectively
Bugle head countersinks without tearing the paper layer
Coarse threads provide strong holding power..
£19.84
£23.81 inc VAT
Brand: Various
Model: Holz-Entgrauer
Delivery Time: 1 - 2 days
TERRACE CLEANER Holz-Entgrauer Wood Degreaser cleans and brightens weathered outdoor wood surfaces, making it ideal for terraces, fences, garden furniture, and other building elements.
Properties
Effectively removes dirt, grey discoloration, traces of rust, algae, and moss
No sanding requir..
Brand: Various
Model: 25kg
Delivery Time: 1 - 2 days
Ultra fast self levelling compound that you can walk on in just 2 hoursSmooths and levels up to 20mm thicknessSuitable for internal and external useWater and frost resistantCan be left as the final wear surface, overpainted or used to level sub-floors prior to laying decorative floor coveringsCan wi..
Brand: Various
Model: ST_47mm x 100mm x 4.2m
Delivery Time: 1 - 2 days
4.2m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..