47 x 150mm Masonry Return Hanger R215mm
47 x 150mm Masonry Return Hanger R215mm
- Product Code: U1539
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model: FHMR47X150R215
- Weight: 0.57kg
47 x 150mm Masonry Return Hanger R215mm
47 x 150mm Masonry Return Hanger R215mm, meticulously designed for a range of applications and installations similar to the standard Masonry Joist Hanger. The innovative return feature offers enhanced lateral support by wrapping around the rear of masonry or timber components. Standard configuration includes a 25mm drop on the return flange, while custom variations can be accommodated upon request. Experience a long-term safe working load of 5.4 kN.
Features- Constructed from pre-galvanized steel, 2.4mm thick
- Galvanized steel compliant with EN 10346 DX51D Z600
- Manufactured to meet EN 845-1:2013 standards
- Rigorously tested and certified by CERAM Research Ltd.
- Ensure the back plate of the hanger lies flush against the vertical masonry support
- Require a minimum of 3 courses (675mm of masonry) above the masonry flange
- Allow both supporting and upper masonry to mature before applying any loads
- Joist should be cut square and fit snugly against the back of the hanger, with a maximum allowed gap of 6mm
- Secure the side flanges with 30 x 3.75mm galvanized square twist nails or equivalent
- Enhance lateral restraint using heavy-duty straps
- Always securely fix or adequately embed the masonry flange, avoiding placement in dry slots
- Ensure compatibility of corrosion-resistant fixings – do not mix galvanized and stainless steel products
- Use mortar of correct strength as per British Standard guidelines
Masonry-Return-Hangers_data_sheet.pdf
Brand: Teco
Model: WM132x150
Delivery Time: 3 - 5 days
132mm x 150mm Welded Masonry Joist Holder is designed to provide sturdy support for 150mm high timber joists. The joist holder's actual height is 140mm, and the flange is integrated into brick or block walls. It has a minimum crushing strength of 3.5N/mm. The Welded Masonry Joist Holder is also suit..
Brand: Teco
Model: LL - 125x450
Delivery Time: 1 - 2 days
Woody Long Leg Joist Hanger 125 x 450mm, crafted from sturdy 1.5mm thick pre-galvanized mild steel in accordance with the exacting standards of EN 10346 DX51D+Z275. Boasting a generous 50mm joist bearing, this timber-to-timber joist hanger is designed for applications such as Loft Conversions, where..
Brand: Teco
Model: MFT63/346BA - 63x142
Delivery Time: 1 - 2 days
63mm x 142mm Multifunctional Joist Hanger serves as a Face Fix Joist Hanger, constructed from 2mm thick pre-galvanized mild steel in accordance with the specifications outlined in BS EN 10327:2004 DX51D+Z275. This hanger is meticulously designed to facilitate timber-to-masonry and timber-to-timber f..
Brand: Teco
Model: FHMR47X125R115
Delivery Time: 1 - 2 days
47 x 125mm Masonry Return Hanger R115mm is designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. There is a 25mm drop on the return flange as standard but many special..
Brand: Teco
Model: HWTNT38
Delivery Time: 2 - 3 Days
Heavy Duty Face Fix Joist Hanger 38 x 150mm, crafted for timber-to-timber, concrete, or masonry installations. Made from durable 2.5mm thick pre-galvanized mild steel, this hanger adheres to the exacting standards outlined in BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
A..
Brand: Teco
Model: MFM - 38x101
Delivery Time: 1 - 2 days
38mm x 101mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275 using 1.2mm thick pre-galvanised mild steel. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x n..