Ceresit ZU (Base Coat Render) Insulation and Mesh Adhesive 25kg - 48 bag pallet
Ceresit ZU (Base Coat Render) Insulation and Mesh Adhesive 25kg - 48 bag pallet
- Product Code: U3390
- Delivery Time: 1 - 2 days
- Brand: Ceresit
- Model and Size: ZU-25kg-48bags
Ceresit ZU (Base Coat Render) Insulation and Mesh Adhesive 25kg - 48 bag pallet
Ceresit ZU Insulation and Mesh Adhesive is a cement-based, polymer-modified adhesive specifically designed for fixing white or graphite expanded polystyrene (EPS) insulation boards to exterior walls. The EPS boards should meet the requirements of external thermal insulation composite systems (ETICS) according to British Standard EN 13163. Ceresit ZU provides an excellent bond between the insulation and the substrate, whether that is concrete, brickwork, or existing renders. It is also used to embed the reinforcing mesh layer over the insulation, creating a base coat render system. The adhesive is flexible enough to accommodate minor movements in the substrate.
CHARACTERISTICS
- Cement-based, polymer-modified adhesive
- Designed for fixing white or graphite expanded polystyrene (EPS) insulation boards
- EPS boards should meet requirements of EN 13163 for ETICS
- Provides excellent bond strength between insulation and substrate
- Suitable for concrete, brickwork, and existing render substrates
- Used to embed reinforcing mesh, creating a base coat render system
- Flexible to accommodate minor substrate movements
- Easy to apply
APPLICATIONS
- External walls
Application and installation of an external wall insulation system
Fixing polystyrene boards.
- Adhesive should be applied with a trowel around the perimeter of the board - band of 3-4cm wide and several blobs in the centre.
- Place the board to the wall and press it down with a long float. Properly applied mortar after pressing the board to the wall should cover min. 40% of its area.
- The boards should be fixed closely to each other in one plane, with the horizontal joints in different levels.
Installing the reinforced mesh.
- Add the adhesive with a 10 or 12 mm notched trowel on the surface polystyrene boards.
- Press the mesh on the fresh mortar until it is no longer visible.
- Thin coat render can be made after approx. 24 hours from the application of the reinforcement layer.
BBA Certificate Ceresit Ceretherm Classic EPS External Wall Insulation System.pdf
Brand: Ceresit
Model and Size: 1000x500mm - 6.0m2
Delivery Time: In stock, 1-2 days
Ceresit Graphite Polystyrene EPS board is a polystyrene board that has had graphite added which considerably increases insulation performance.UsesBalcony loggias
Sandwich walls
Framed wall surfaces
Continuous outer layers of frame walls
Cavity block and brick walls
Gaps in closed or ventil..
£39.95
£47.94 inc VAT
Brand: Ceresit
Model and Size: HALF PACK 150mm White
Delivery Time: 1 - 2 days
Ceresit White Polystyrene EPS board is a polystyrene board for use in conjunction with any render systemUsesSolid brick and block wallsCavity brick and block wallsBalconies and loggiasRoofs and between raftersRims, lintels and revealsCeilings in garages and basementsWalls with a frame structure..
Brand: Ceresit
Model and Size: CT17 - 5litres
Delivery Time: 5 - 7 days
Ceresit CT17 penetrates deeply, binds dust, and reduces water absorption.
Properties:
Strengthens the substrate surface
Reduces substrate absorbency
Improves adhesion to the substrate
Application of tiles on cement and cement-lime substrates
after only 15 mins
Yellow colour – allows to contro..
£24.46
£29.35 inc VAT
Brand: Ceresit
Model and Size: 1000x500mm - 3.50m2
Delivery Time: 3 - 5 days
PropertiesLightweightEasily cut by knife to any size and shapeHighly resistant to mould growthHighly durableCost effectiveEnvironmentally friendlyUsesNew and existing rendered or unrendered masonryTimber backed walls, roofs, and floorsCavity wall Layered external wallsPlaces likely to develop t..
£36.95
£44.34 inc VAT
Brand: Ceresit
Model and Size: Ceresit CT100
Delivery Time: 5 - 7 days More options available
CharacteristicsHighly flexible,
Easy to mix, apply and spread,
Fibre-reinforced,
Resistant to extreme mechanical loads and thermal stresses,
Resistant to climatic conditions,
Highly hydrophobic,
Cracks bridging up to 2mm,
Eliminates the need of a primer before plaster application,
Possibilit..
Brand: Ceresit
Model and Size: 10 litres
Delivery Time: In stock, 1-2 days
Ceresit CT16 is designed for priming substrates before the application of renders, finishes and paint coats. It facilitates the application and texturing of plasters, optimizes the drying process and improves the plaster-to-substrate adhesion. Provides a uniform substrate, prevents stain build-up on..
£41.25
£49.50 inc VAT