Menu
Menu
Your Cart
Ceresit Ewi Systems
4eco
Quality Metal Roofing
Torch-on Roofing Felt

Ceresit CT84 Express - Internal and External Wall Insulation Boards Foam Adhesive 750ml

Ceresit CT84 Express - Internal and External Wall Insulation Boards Foam Adhesive 750ml
Ceresit CT84 Express - Internal and External Wall Insulation Boards Foam Adhesive 750ml
Price: £12.69 (£15.23 inc VAT)
Price per m2: £1.27/m2 (£1.52 inc VAT)
  • Product Code: U965
  • Delivery Time: In stock, 1-2 days
  • Brand: Ceresit
  • Model and Size: CT84

Ceresit CT84 Express - Internal and External Wall Insulation Boards Foam Adhesive 750ml

Tube volume: 750ml
Application Temperature: 0 to +40
Drying time: 10 mins
Hardening time: 2 hours
Coverage: 10m2

Ceresit CT84 Express is used for fixing expanded polystyrene boards in the complex Ceresit Ceretherm systems for thermal insulation for external building walls (ETICS). Approximately 2 hours after the application, the foamed polystyrene boards can be smoothed, anchored and then the armoured layer may be applied using the Ceresit CT85, CT87. CT84 polyurethane adhesive is also used for fixing materials such as EPS and XPS foamed polystyrene to surfaces such as wood, OSB boards, glass, bitumens, ceramic bricks, concrete, coated and galvanised sheet plate, dry cellular concrete and after water impact, drywall, and for layered fixing of expanded polystyrene boards under conditions of normal and lower temperatures, also in thermal systems. Used with gun.

PROPERTIES

  • Yield: 10 m² – 100% more than traditional cement adhesives; 15% higher adhesive strength than traditional cement adhesives
  • Anchoring after ca. 2 h – speeding up thermal insulation work. In case of application of CT84 and Ceresit Ceretherm Express system insulation work can take 5 days less
  • Perfect for ”warming to warming” system – 1 m² of expanded polystyrene boards fixed with CT84 adhesive weight 100 g, instead of 5 kg in case of cement adhesives
  • Enhanced thermal insulation properties – unlike traditional cement adhesives, CT84 has thermal insulation properties similar to foamed polystyrene or wool
  • High homogeneity of adhesive thanks to metal ball protecting against too large air bubbles

Brand: Ceresit Model and Size: 1000x500mm - 6.0m2
Delivery Time: In stock, 1-2 days
Ceresit Graphite Polystyrene EPS board is a polystyrene board that has had graphite added which considerably increases insulation performance.UsesBalcony loggias Sandwich walls Framed wall surfaces Continuous outer layers of frame walls Cavity block and brick walls Gaps in closed or ventil..
£37.95
£45.54 inc VAT
Add to Cart
Brand: Ceresit Model and Size: CT327
Delivery Time: 1 - 2 weeks
CharacteristicsAlkali-resistant, Slip proof, Tear proof, High impact resistance. ApplicationEmbed the glass-fibre mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface.Embed the webbing into the upper third of the reinforcing la..
Add to Quote Compare this Product
Brand: Ceresit Model and Size: Ceresit CT190
Delivery Time: In stock, 1-2 days
Ceresit CT190 Adhesive and Reinforcing Mortar is an element of the Ceresit Ceretherm ETICS (External Thermal Insulation Composite Systems) for use with mineral wool insulation. It is a cement-based adhesive and reinforcing mortar designed for bonding and embedding mineral wool insulation slabs onto ..
£18.95
£22.74 inc VAT
Add to Cart
Ceresit CT79 Impactum 1.5mm grain Elastomeric Render - stone texture
Guide Price
Brand: Ceresit Model and Size: CT79 1.5mm
Delivery Time: 5 - 7 days More options available
PorpertiesHighly elastic, reinforced with carbon, glass and polyacrylamid fibres combination Extremely resistant to weather conditions Extremely resistant to operating damages – Over 100 Joules forceExtremely resistant for thermal stressesReady to useSelf-cleaningHighly dirt resistantVery low wate..
Guide Price: £175.00
£210.00 inc VAT
Add to Quote Compare this Product
Brand: Ceresit Model and Size: CT80 Universal Adhesive
Delivery Time: 1 - 2 days
Ceresit CT80 is an adhesive mortar for fastening EWI mineral wool slabs, polystyrene and phenolic boards and also for making a thin layer of base coat render reinforced with fibreglass mesh on the insulation in Insulated Renders Systems. Ceresit CT80 has very good adhesion to load-bearing, dense and..
£15.20
£18.24 inc VAT
Add to Cart
Brand: Ceresit Model and Size: HALF PACK 20mm Grey
Delivery Time: 1 - 2 days
Ceresit Graphite Polystyrene EPS board is a polystyrene board that has had graphite added which considerably increases insulation performance.UsesBalcony loggias Sandwich walls Framed wall surfaces Continuous outer layers of frame walls Cavity block and brick walls Gaps in closed or ventil..
Add to Quote Compare this Product