Ceresit CT327 Glass-Fibre Armouring Mesh Roll

Characteristics

• Alkali-resistant,
• Slip proof,
• Tear proof,
• High impact resistance.

Application

• Embed the glass-fibre mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface.
• Embed the webbing into the upper third of the reinforcing layer, and then cover completely with reinforcing mortar, pushing the mesh into it using a metal trowel.
• Properly applied mesh should not be visible and completely covered in the mortar.
• It is important to keep the mesh overlaps on next applied belts to about 10 cm.
• These overlaps should not coincide with the board joints.
• In the case of openings such as windows the mesh should be sunk further.
• Work should be performed in dry conditions, at temp. of air and the substrate from +5 C to +25 C.

Certification

European Technical Approval (ETA): 13/0086,

Certificate: 1488-CPR-0407/Z