Ceresit CS28 Thermo Resistant Silicon Sealant 280ml
Ceresit CS28 Thermo Resistant Silicon Sealant 280ml
- Product Code: U3361
- Delivery Time: 1 - 2 days
- Brand: Ceresit
- Model: Ceresit CS28
Ceresit CS28 Thermo Resistant Silicon Sealant 280ml
Volume: 280ml
Ceresit CS28 Thermo Resistant Silicon Sealant is a heat-resistant sealant which is one-component elastic sealant that is stable and elastic in the temperature range from -65°C to +260°C, short-term up to a temperature of +315°C. The product exhibits good adhesion to most materials including clean metal, glass, most non-oily woods, silicone resin, hardened silicone rubber, ceramics, natural and synthetic fibres and many painted and plastic surfaces.
FEATURES
- Good adhesion to most non-absorbent materials
- Specific odor during vulcanization
- Resistant to ozone, ultraviolet radiation and temperature extremes
- High temperature resistance (up to +315°C)
- After curing, the product remains permanently elastic
Brand: Ceresit
Model: CT74 1.5mm - 25kg
Delivery Time: 1 - 2 days More options available
Ceresit CT74 Silicone Render is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. The recommended application of the plaster CT74 is as façade plaster within Ceresit ETICS (External Thermal Insulation Composite..
£69.30 (£83.16 inc VAT)
£54.95
Brand: Ceresit
Model: 1000x500mm - 6.0m2
Delivery Time: In stock, 1-2 days
PropertiesLightweightEasily cut by knife to any size and shapeHighly resistant to mould growthHighly durableCost effectiveEnvironmentally friendlyUsesNew and existing rendered or unrendered masonryTimber backed walls, roofs, and floorsCavity wall Layered external wallsPlaces likely to develop t..
£36.95
£44.34 inc VAT
Brand: Ceresit
Model: Ceresit CT100
Delivery Time: 5 - 7 days More options available
CharacteristicsHighly flexible,
Easy to mix, apply and spread,
Fibre-reinforced,
Resistant to extreme mechanical loads and thermal stresses,
Resistant to climatic conditions,
Highly hydrophobic,
Cracks bridging up to 2mm,
Eliminates the need of a primer before plaster application,
Possibilit..
Brand: Ceresit
Model: 1000x500mm - 30m2
Delivery Time: In stock, 1-2 days
Ceresit Graphite Polystyrene EPS board is a polystyrene board that has had graphite added which considerably increases insulation performance.UsesBalcony loggias
Sandwich walls
Framed wall surfaces
Continuous outer layers of frame walls
Cavity block and brick walls
Gaps in closed or ventil..
£37.95
£45.54 inc VAT
Brand: Ceresit
Model: CR65
Delivery Time: 1 - 2 days
Ceresit CR65 Cementitious Waterproofing Slurry is a Rigid Slurry that can be used on the horizontal and vertical surfaces of buildings, structural components, tanks and swimming pools with a water depth of ≤ 10 m. Suitable for the subsequent waterproofing of old buildings or components on the negati..
£29.98
£35.98 inc VAT
Brand: Ceresit
Model: CT327
Delivery Time: 1 - 2 weeks
CharacteristicsAlkali-resistant,
Slip proof,
Tear proof,
High impact resistance.
ApplicationEmbed the glass-fibre mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface.Embed the webbing into the upper third of the reinforcing la..





