50mm x 75mm x 4800mm CLS Sawn Timber (38mm x 63mm)
50mm x 75mm x 4800mm CLS Sawn Timber (38mm x 63mm)
- Product Code: U1278
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: 50mm x 75mm x 4800mm
- Weight: 6.00kg
Brand: Various
Model: 20kg
Delivery Time: 1 - 2 days
A high strength, high performance floor levelling compound that is designed to raise floor levels and to smooth uneven floors in conservatories and extensions.Suitable for levelling floor depths of 5-50mm in one applicationNo additional aggregate required for mixingWalk on hard from 90 minsLay floor..
Brand: Various
Model: 4.2x13mm - for thinner gauge steel
Delivery Time: 1 - 2 days
Small screws with wafer head and drill point used for thinner gauge steelPropertiesInstalled flushScrew spacing 250mm..
Brand: Various
Model: 18 x 119mm x 4.4m
Delivery Time: 1 - 2 days
MDF Skirting Truprofile Square Profile/Bevelled with V Groove is an MDF Moulding with a superior prime coating needing minimal finishing, saving both time and money.PropertiesManufactured In The UKFree From Defects Such As Shakes, Knots And ResinsManufactured From Moisture Resistant MDFEasy To Handl..
Brand: Various
Model: 100mm x 50m
Delivery Time: 1 - 2 days
PropertiesAdheres without primer to many different substrates,
Resistant to UV & weathering,
Seals against gases & water vapour diffusion,
Simple, effective & easy to applySelf AdhesiveHigh performance sealantTear resistantUsesInternal and external sealing Repair of joints and overlap..
£12.29
£14.75 inc VAT
Brand: Various
Model: STR_47mm x 175mm x 6.0m
Delivery Time: 1 - 2 days
Regularised Sawn Treated Timber C24, regularised by planing all round with 'eased' (rounded) corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.High Pressure treated with Tanalith 'E' (or similar)Kiln dried to help improve stabil..
Brand: Various
Model: STR_47mm x 75mm x 3m
Delivery Time: 1 - 2 days
Regularised Sawn Treated Timber, regularised by planing all round with 'eased' (rounded) corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.High Pressure treated with Tanalith 'E' (or similar)Kiln dried to help improve stability ..