25mm x 38mm x 3.6m Sawn Treated Timber Softwood Carcassing
25mm x 38mm x 3.6m Sawn Treated Timber Softwood Carcassing
- Product Code: U1564
- Delivery Time: 1 - 2 days
- Brand: Various
- Model and Size: ST_25mm x 38mm x 3.6m
Brand: Various
Model and Size: 3.5x65mm - coarse point
Delivery Time: 1 - 2 days
Properties
Fixing plasterboard to timber and timber studs
Sharp point penetrates effectively
Bugle head countersinks without tearing the paper layer
Coarse threads provide strong holding power..
£31.42
£37.70 inc VAT
Brand: Various
Model and Size: STR_47mm x 125mm x 3.6m
Delivery Time: 1 - 2 days
3.6m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Brand: Various
Model and Size: ST_25mm x 38mm x 4.8m
Delivery Time: 1 - 2 days
Sawn Treated Timber Softwood Carcassing is high quality treated sawn timber for general constructionPropertiesHigh Pressure treated with Tanalith 'E' (or similar)All cut ends must be re-sealed with a proprietary treatmentAll of our softwoods are responsibly sourcedAdditional lengths may be available..
Brand: Various
Model and Size: Plastering Sand Trade Pack
Delivery Time: 1 - 2 days
A mixture of sharp and soft sand for various uses by plasterersSupplied in plastic packaging - suitable for outside storageIdeal for general building and landscaping projectsMix with cement and water to make bricklaying mortarActual weight will vary depending on moisture contentThe product is locall..
Brand: Various
Model and Size: STR_75mm x 100mm x 4.8m
Delivery Time: 1 - 2 days
75mm x 100mm x 4.8m Sawn Treated Timber Regularised C16/C24 is planed on all edges with ‘eased’ (rounded) corners for comfortable handling. This regularised carcassing finishes 2mm below nominal thickness and 5mm below nominal width, ensuring consistent dimensions.
Properties
High-pressure tre..
Brand: Various
Model and Size: 14.5mm x 119mm
Delivery Time: 1 - 2 days
Redwood Tongue and Grooved V Jointed Matchboard Standard is a high quality smooth Tongue and grove cladding board with a V joint which gives an attractive pleasing finish. It can be stained, painted or varnished.PropertiesResponsibly Sourced RedwoodsMany Other Patterns And Sizes Available To OrderAl..