47mm x 150mm x 3.6m Kiln Dried Regularised Sawn Treated Timber C16
47mm x 150mm x 3.6m Kiln Dried Regularised Sawn Treated Timber C16
- Product Code: U1602
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: STR_47mm x 150mm x 3.6m
47mm x 150mm x 3.6m Kiln Dried Regularised Sawn Treated Timber C16
Regularised Sawn Treated Timber C16, regularised by planing all round with 'eased' (rounded) corners for comfortable handling. Regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.
- High Pressure treated with Tanalith 'E' (or similar)
- Kiln dried to help improve stability and straightness
- Strength graded to C16 for known structural performance
- It is important that all cut ends are re-sealed with a proprietary treatment
- Additional lengths may be available - please contact us for further information
Brand: Various
Model: 2440mm x 1220mm x 12mm
Delivery Time: 1 - 2 days
Marine Plywood is a high quality panel, which performs well under conditions where moisture is a concernPropertiesSuitable for general joineryCan be painted and stainedQ Mark verifiedHigh quality core veneerFace veneer is 1mm thick after sandingMade in accordance with BS1088Not recommended for build..
Brand: Various
Model: 4.2x13mm - for thicker gauge steel
Delivery Time: 1 - 2 days
4.2x13mm Wafer Head Screw with Drill Point for fixing plasterboard on to thicker gauge steel frameworks.PropertiesInstalled flushScrew spacing 250mm..
Brand: Various
Model: 32mm x 38mm 2.1m
Delivery Time: 1 - 2 days
Manufactured from high quality Scandinavian 5ths grade redwood (pine). Sizes stated are nominal, finished sizes will be approx 5-6mm smaller.Responsibly Sourced SoftwoodMany Other Patterns And Sizes Available To OrderAlso Available In Tp 'best' Quality. Scandinavian Unsorted Redwood (pine)Also Avail..
Brand: Various
Model: 50mm x 50mm
Delivery Time: 1 - 2 days
Hardwood Planed Timber prepared is a medium to fine textured, pink hardwood with good machining properties and moderate durability. Ideally suited for the manufacture of Joinery.PropertiesLightweight with straight grainGood strength properties.Plantation grown for fewer defects.Bespoke cross-cutting..
Brand: Various
Model: 3.5x32mm - coarse point
Delivery Time: 1 - 2 days
Properties
Fixing plasterboard to timber and timber studs
Sharp point penetrates effectively
Bugle head countersinks without tearing the paper layer
Coarse threads provide strong holding power..
£12.10
£14.52 inc VAT
Brand: Various
Model: STR_47mm x 125mm x 3.0m
Delivery Time: 1 - 2 days
3.0m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..