50mm x 75mm Redwood Planed Timber Standard (Finished Size 44mm x 69mm)
50mm x 75mm Redwood Planed Timber Standard (Finished Size 44mm x 69mm)
- Product Code: U1637
- Delivery Time: 1 - 2 days
- Brand: Various
- Model: 50mm x 75mm
50mm x 75mm Redwood Planed Timber Standard (Finished Size 44mm x 69mm)
Redwood Planed Timber Standard, manufactured from high quality Scandinavian 5ths grade redwood (pine). Sizes stated are nominal, expect finished sizes to be approx 5-6mm smaller.
- All Of Our Softwoods Are Responsibly Sourced
- Other Patterns And Sizes Available To Order
- Also Available In Tp 'best' Quality. Scandinavian Unsorted Redwood (pine)
- Also Available Low Pressure Preservative Treated
- Also Available Primed
- Also Available Cross Cut To Bespoke Length
- Due To The Machining Process, This Products Finished Dimensions Will Be Smaller Than The Nominal Sizes Stated. Typically, 5 To 6mm Less On The Thickness And 5 To 8mm On Width (dependent On Original Section)
- Range Of Lengths Normally Available: 1.8m And Longer
Brand: Various
Model: 2440 x 1220 x 12mm
Delivery Time: 1 - 2 days
Moisture Resistant MDF is a commonly used board in areas where there are high humidity levels. Compared to standard MDF, moisture resistant MDF has a special moisture repellent resin that provides a high level of moisture resistance. Moisture Resistant MDF can be used in places such as kitchens, bat..
Brand: Various
Model: ST_47mm x 100mm x 4.2m
Delivery Time: 1 - 2 days
4.2m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Brand: Various
Model: ST_47mm x 75mm x 2.4m
Delivery Time: 1 - 2 days
Kiln Dried Regularised Sawn Treated Timber C16 which has been regularised by planing all round with eased corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesHigh Pressure treated with Tanalith 'E' (or similar)Kiln dried..
Brand: Various
Model: 75mm
Delivery Time: 1 - 2 days
75mm Bolt Grip Post Support Bolt Down is a sturdy steel support designed to keep timber fence posts elevated, protecting them from rot and insect damage. Its bolt-down system allows secure installation on various surfaces, including near walls.
Properties
Post support size: 75mm
Heavy ste..
Brand: Various
Model: STR_C16/C24
Delivery Time: 1 - 2 days
75mm x 100mm x 3.6m Sawn Treated Timber Regularised C16/C24 is planed on all edges with 'eased' (rounded) corners for easier handling. This timber finishes 2mm below nominal thickness and 5mm below nominal width, ensuring consistent dimensions.
Properties
High-pressure treated with Tanalith ‘E..
Brand: Various
Model: 47mm x 200mm
Delivery Time: 1 - 2 days
Sawn Treated Carcassing Timber is high pressure treated with Tanalith ‘E’ (or similar) to enhance resistance to water and damp. Each piece is kiln dried to help improve stability, strength, durability and straightness, making it suitable for use in many construction projects such as stud partitions,..