Owatrol AQUANETT agent for removing old coatings

Owatrol AQUANETT agent for removing old coatings
Owatrol AQUANETT agent for removing old coatings
Owatrol AQUANETT agent for removing old coatings
Owatrol AQUANETT agent for removing old coatings
Rate this product
Owatrol AQUANETT agent for removing old coatings
  • Product Code: U3165
  • Delivery Time: 1 - 2 days
  • Brand: Various
  • Model: Owatrol-AQUANETT
    Loading...

    Available Options

    Ask question about this product. For price use 'Add to Quote' button.

    Owatrol AQUANETT agent for removing old coatings

    Owatrol AQUANETT Agent for Removing Old Coatings is a biodegradable, solvent-free gel designed for removing old oil coatings from wood surfaces that have darkened or discoloured due to UV exposure. It effectively strips damaged linseed and teak oils, as well as stains caused by corrosion, mould, and weather conditions. AQUANETT dissolves penetrating oils by making them water-soluble, restoring the original appearance of the wood. It is ideal as a preparation stage before applying products such as DEKS D1 or TEXTROL, and is suitable for outdoor wooden elements including terraces, façades, garden furniture and exterior joinery.

    AQUANETT is formulated for removing oils that penetrate the wood without forming a surface film. For removing film-forming oils, use DILUNETT followed by NET-TROL.

    Properties

    • Restores the natural beauty and colour of wood
    • Removes darkening, greying and UV-related discolouration
    • Gentle on wood fibres and does not damage the structure
    • Suitable for pine, larch and other native species
    • Effective on exotic woods including Iroko, Bangkirai, Garapa and Ipe (Lapacho)
    • Ideal preparation before renovation and re-oiling
    • Makes old oil layers water-soluble
    • Biodegradable and solvent-free
    • Odourless

    Before Applying

    • Perform a test in an inconspicuous area
    • Wear protective gloves
    • Always neutralise with NET-TROL after use

    How to Use

    • Do not dilute
    • Mix and shake thoroughly before application
    • Apply evenly across the entire surface
    • Work from top to bottom on vertical elements
    • Allow to act for **5 minutes maximum**
    • Rinse thoroughly with water; warm water and pressure rinsing improve results
    • Neutralise the surface with NET-TROL

    Application Conditions & Coverage

    • Use between 0°C and +40°C
    • Covers between 4 m²/l and 25 m²/l depending on oil type, wood condition and application method

    Tools

    • Brush with synthetic bristles or synthetic roller
    • Wash tools with water
    50mm x 150mm Redwood Planed Timber Standard (Finished Size 44mm x 144mm)
    Brand: Various Model: 50mm x 150mm
    Delivery Time: 1 - 2 days
    50mm x 150mm Redwood Planed Timber Standard (Finished Size 44mm x 144mm)
    Manufactured from high quality Scandinavian 5ths grade redwood (pine). Sizes stated are nominal, finished sizes will be approx 5-6mm smaller.All Of Our Softwoods Are Responsibly SourcedMany Other Patterns And Sizes Available To OrderAlso Available In Tp 'best' Quality. Scandinavian Unsorted Redwood ..
    22mm x 150mm x 3000mm Gravel Board Treated Green 22mm x 150mm x 3000mm Gravel Board Treated Green
    Brand: Various Model: 22mm x 150mm x 3000mm
    Delivery Time: 1 - 2 days
    22mm x 150mm x 3000mm Gravel Board Treated Green
    Gravel Board is used to create a natural straight edge for under fence panels and loose, feather edge fence boards, preventing direct contact with the ground.PropertiesGeneral purpose gravel board used to create the gap between the underside of a fence panel or loose feather edge fence and the groun..
    47mm x 100mm x 3.6m Kiln Dried Regularised Sawn Treated Timber C24 47mm x 100mm x 3.6m Kiln Dried Regularised Sawn Treated Timber C24
    Brand: Various Model: ST_47mm x 100mm x 3.6m
    Delivery Time: 1 - 2 days
    47mm x 100mm x 3.6m Kiln Dried Regularised Sawn Treated Timber C24
    3.6m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
    Sawn Treated Carcassing Timber C16 - 47mm x 225mm (FIN SIZE 45mm x 220mm)
    Brand: Various Model: 47mm x 225mm
    Delivery Time: 1 - 2 days
    Sawn Treated Carcassing Timber C16 - 47mm x 225mm (FIN SIZE 45mm x 220mm)
    Sawn Treated Carcassing Timber is high pressure treated with Tanalith ‘E’ (or similar) to enhance resistance to water and damp. Each piece is kiln dried to help improve stability, strength, durability and straightness, making it suitable for use in many construction projects such as stud partitions,..
    80mm Aluminium Base Track - 2.5m length
    Brand: Various Model: 90608
    Delivery Time: 1 - 2 days
    80mm Aluminium Base Track - 2.5m length
    80mm Aluminium Base Track Profile is a robust and versatile base profile designed for use in external wall insulation systems. Manufactured from high-quality aluminium, it provides a secure and level starting point for the installation of insulation boards. This profile ensures a neat and profession..
    £11.25
    £13.50 inc VAT
    22mm x 125mm x 1800mm Feather Edge Board Treated Brown 2 ex
    Brand: Various Model: 22mm x 125mm x 1800mm
    Delivery Time: 1 - 2 days
    22mm x 125mm x 1800mm Feather Edge Board Treated Brown 2 ex
    Feather Edge Board treated for external use, ideal for fencing, or cladding of sheds or buildings.Feather edge boards create the perfect fenceTreated to preserve lifeBrown treatedFeathered section enables boards to lap evenlyCan be used without replacing existing postsRough sawn finishImportant to e..