Ceresit CT280 Winter Additive for ETICS and Wet Renders 250g
Ceresit CT280 Winter Additive for ETICS and Wet Renders 250g
Price: £6.22 (£7.46 inc VAT)
- Product Code: U974
- Delivery Time: 2 - 4 days
- Brand: Ceresit
- Model: CT280
- Weight: 0.25kg
Ceresit CT280 Winter Additive for ETICS and Wet Renders 250g
Ceresit CT280 Winter Additive is intended for use as an additive in the late autumn and early spring periods, when the temperature at night drops below zero so work can continue. It is used as an additive for Ceresit cementbase mineral adhesive mortars and adhesive and reinforcing mortars (CT83, CT85, CT87, CT180, CT190), in order to accelerate binding and drying in low temperatures and high air humidity. Application of Ceresit products should take place when the air and ground temperatures are above zero and the fall of the temperature below zero is permissible after 6 8 hours after finishing application.
PROPERTIES
- Enables conducting works in low temperature and high air humidity
- Easy to use
- Neutral for other materials properties
Brand: Ceresit
Model: 1000x500mm - 3.50m2
Delivery Time: 1 - 2 days
PropertiesLightweightEasily cut by knife to any size and shapeHighly resistant to mould growthHighly durableCost effectiveEnvironmentally friendlyUsesNew and existing rendered or unrendered masonryTimber backed walls, roofs, and floorsCavity wall Layered external wallsPlaces likely to develop t..
£36.95
£44.34 inc VAT
Brand: Ceresit
Model: CT98 5L
Delivery Time: 5 - 7 days
PropertiesEffectively removes dirt from the façade
High performance
Works inside and outside
Does not contain corrosive substances
Removes dirt, oils, greasesUsesWashing and degreasing of heavily soiled facadesCleaning and degreasing surface soiled mineral floorsClean glass and plastic surfacesR..
£73.25
£87.90 inc VAT
Brand: Ceresit
Model: CT80 Universal Adhesive
Delivery Time: 1 - 2 days
Ceresit CT80 is an adhesive mortar for fastening EWI mineral wool slabs, polystyrene and phenolic boards and also for making a thin layer of base coat render reinforced with fibreglass mesh on the insulation in Insulated Renders Systems. Ceresit CT80 has very good adhesion to load-bearing, dense and..
£15.20
£18.24 inc VAT
Brand: Ceresit
Model: HALF PACK 10mm White
Delivery Time: 1 - 2 days
Ceresit White Polystyrene EPS board is a polystyrene board for use in conjunction with any render systemUsesSolid brick and block wallsCavity brick and block wallsBalconies and loggiasRoofs and between raftersRims, lintels and revealsCeilings in garages and basementsWalls with a frame structure..
£21.50
£25.80 inc VAT
Brand: Ceresit
Model: CT34 - 25kg
Delivery Time: 7 - 10 days
Ceresit CT34 White Smooth Mineral Render is used to make smooth surfaces on reinforced layers in complex Ceresit Ceretherm thermal insulation systems. The material can also be used to repair traditional cement-lime plasters inside and outside buildings. Even thin-layer walls and ceilings can be made..
£38.00
£45.60 inc VAT
Brand: Ceresit
Model: 1000x500mm - 15m2
Delivery Time: In stock, 1-2 days
Ceresit Graphite Polystyrene EPS board is a polystyrene board that has had graphite added which considerably increases insulation performance.UsesBalcony loggias
Sandwich walls
Framed wall surfaces
Continuous outer layers of frame walls
Cavity block and brick walls
Gaps in closed or ventil..
£37.95
£45.54 inc VAT