Menu
Menu
Your Cart
Ceresit Ewi Systems
4eco
Quality Metal Roofing
Torch-on Roofing Felt

Owatrol DILUNETT gel for removing old coatings

Owatrol DILUNETT gel for removing old coatings
Owatrol DILUNETT gel for removing old coatings
  • Product Code: U3164
  • Delivery Time: 1 - 2 days
  • Brand: Various
  • Model and Size: Owatrol DILUNETT
Loading...

Available Options

Owatrol DILUNETT gel for removing old coatings

DILUNETT It is a solvent-free gel that removes old paint coatings based on phthalic and alkyd paints / varnishes. The agent is non-flammable, paraffin-free and does not evaporate, but general safety rules should always be followed. It can be applied on flat surfaces, and thanks to the consistency of the gel, it does not dry out and run off, making it easier to work on vertical surfaces. The advantage of the DILUNETT gel formula is the possibility of extended operation time on the surface by removing up to 8 older coatings. Recommended for use on any type of wood except oak, chestnut, walnut and cedar. On other materials, it will very well remove surface layers from metal, cement, stone and PVC elements without damaging the plastic. Do not apply to aluminium parts

PROPERTIES:

  • Hazard-free - VOC-free, non-flammable
  • No poisonous fumes
  • It does not require mechanical operation
  • Can be used at higher temperatures
  • Gel consistency
  • Strong - removes up to 8 older coatings
  • It violates the layers by dissolving them
  • Easy to apply
  • With the help of water, you can reactivate the measure
  • It does not damage the surface, therefore it is widely used
  • It will not work on two-component paints and sintered paints

Before use We recommend that you make the test in an inconspicuous place. Get rid of flaking fragments of paints, stains or varnishes and clean them from dirt, and flat workplaces should be descended. In order not to cause greying of the wood, the reaction time for DILUNETT should not be exceeded

HOW TO USE:

  • We apply in thick layers over the entire target surface. We leave.
  • The agent is active for 5 minutes. up to 12 hours
  • For better efficiency, do not exceed the operating time - the original surface may turn Gray
  • After the indicated time has elapsed, rinse abundantly with water, a cloth or a pressure washer up to 60 bar
  • The use of warm water will facilitate rinsing
  • We always neutralize with NET-TROL, especially when the surface is not smooth and porous
  • The maximum duration of DILUNETT activity on pavements is from 10 to 45 minutes.
  • EFFICIENCY: 4 m² / l actual consumption depends on the condition, species, type of surface, and mainly the number of layers to be removed
  • NEUTRALIZATION: Always use NET-TROL
  • TEMPERATURE: Use between 5 ° C and 35 ° C.
  • TOOLS: brush with synthetic bristles, putty knife, high pressure washer.
  • DO NOT store in metal containers
  • TOOLS WASH: water

Brand: Various Model and Size: 25 x 75mm
Delivery Time: 1 - 2 days
Timber Architrave Torus Best Pattern 403B is manufactured from high quality Scandinavian Unsorted quality Redwood (Pine). Sizes stated are NominalPropertiesResponsibly sourced softwoods Available low pressure preservative treated Available primed Finished dimensions will be typically, 5 to 6mm l..
Add to Quote Compare this Product
Brand: Various Model and Size: 2440mm x 1220mm x 25mm
Delivery Time: 1 - 2 days
Structural Hardwood Plywood is suitable for a variety of applications, including walls, floors and roofs.PropertiesCan be used both internally and externallyCan be used in humid conditionsProduct must be treated with an appropriate wood treatment/sealant before external useCertificationComplies with..
Add to Quote Compare this Product
Brand: Various Model and Size: ST_47mm x 100mm x 2.4m
Delivery Time: 1 - 2 days
Kiln Dried Regularised Sawn Timber Treated C16 has been regularised by planing all round with eased corners for comfortable handling. The regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesHigh Pressure treated with Tanalith 'E' (or similar)Kiln dried to im..
Add to Quote Compare this Product
Brand: Various Model and Size: 2440mm x 1220mm x 18mm
Delivery Time: 1 - 2 days
Moisture resistant MDF Lite is an incredibly versatile panel, with a high internal bond strength, used extensively throughout the construction and furniture industries, for interior applications that may be subject to occasional wetting or humidity.PropertiesUsed for internal applications where mois..
Add to Quote Compare this Product
Brand: Various Model and Size: 3.5x42mm - coarse point
Delivery Time: 1 - 2 days
Properties Fixing plasterboard to timber and timber studs Sharp point penetrates effectively Bugle head countersinks without tearing the paper layer Coarse threads provide strong holding power..
£18.75
£22.50 inc VAT
Add to Cart
Brand: Various Model and Size: 2440 x 1220 x 5.5mm
Delivery Time: 1 - 2 days
Hardwood Plywood is a commonly used product across homes and is manufactured using thin sheets of veneers glued together. The hardwood plywood offers a high quality finish, that is suitable for joinery, furniture and many internal projects. Our range of hardwood plywood offers plenty of strength for..
Add to Quote Compare this Product